UPVC Pipes & Fittings

Standards & Specifications:

• IS 12818 : 2010 – Specification for UPVC Screen & Casing Pipes for Bore / Tubewell

Material:

• UPVC Compound Meet the requirements of IS : 10148

Sizes:

• Casing Medium (CM) – 35mm to 200mm
• Casing Shallow (CS) – 150mm to 200mm
• Medium Well Screen (RMS) – 100mm to 200mm

Length:

• 3 Mts. & 6 Mtr.

Colour:

• Pipe Colour : Blue

Features

• High Impact Strength
• High Tensile Strength
• Special Trapezoidal Thread
• Corrosion Resistant
• Non Toxic

Advantages

• Easy Installation
• Light Weight
• Chemical & Corrosion Resistance
• Long Lasting
• Overall Economy

Areas of Application

• Tube Wells.
• Bore Wells.
• Collector Wells.
• Solution Mining Wells.
• Waste Disposal & Injection Wells.
• Agriculture Vertical Drainage Wells.
• Aquifer Recharge Wells.
• Rain Water Harvesting.

• Drill a bore of the required size and depth in the ground using suitable boring technique.
• Ensure that sufficient screen and plain casing pipes have been made available based on water source.
• Select appropriate type of pipes (CM or CS) to avoid collapse in the bore.
• Ensure that every casing pipe to be installed is provided with rubber seal (Ring) at threads.
• Always use bottom cap with sand traps.
• Fit “C” Clamp below the bell end of the pipe and lower assembly down in the bore with the help of chain pulley block.
• After lowering the pipe up to the clamp level, tight the second pipe gently with the lowered pipe.
• Use chain wrench for proper jointing but do not over tight.
• Fix next clamp below bell end of the second pipe and connect the chain pulley with clamp.
• Remove the clamp of lower pipe and start lowering further.
• Repeat the jointing method till the required depth of bore well is reached.
• Fill the gravel between pipe and bore hole.

The PVC Protector Casing have several advatages over conventional steel well casings.

• Non toxic
• Corrosion resistant
• Light weight
• Long Lasting
• Easy installation
• Higher well yields